|Package:Standard Export Box||Trademark:Taishun|
|Origin:Shenzhen, China||Input Voltage:AC220V or AC110V|
|AC Frequency:47- 440Hz||Cold Surge Current:<=60A(AC220V Input) ≤ 30A(AC110 Input)|
|Current Leakage:<=0.7mA(AC220V Input)≤ 0.4mA(AC110V Input)||Output Maximum Input Voltage:DC 25kv|
|Maximum Output Current:DC 20mA||Efficiency:90% (Full Load)|
|Mean Time Between Failure (Mtbf):>10000h||Response Speed:<=1ms|
1) Good compatibility: It can be applicable to 70w 60w 50w and 40W laser tube.
2) Fast response speed and effect.
3) Dramatically lengthen the life of laser.
4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
5) Easy control of laser power: Both 0~5V analog signal and PWM signal can control the laser power.
6) The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.
9) Application: acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut, etc.
|Input Voltage||Input Voltage||AC220V or AC110V|
|Cold surge current||≤60A(AC220V input)||≤30A(AC110V input)|
|Leak current||≤0.7mA(AC220 input)||≤0.4mA(AC220V input|
|Output||Max output Voltage||DC 35KV|
|Max Output current||DC 24mA|
|Response speed||≤1ms(the time from output of switch signal to 90%of initial setting current)|
|Control port||TLL electricity level switch control, valid electricity has high/low level choices|
|Volage-resisting||Input-Output ,input-machine hull: 1500V 10mA 60s AC output cathode and machine hull connection|
|Protection||Can be used an opening way in a short time(request the outer shell be good to connect the ground avoid arcing between anode and machine hull connection in the machine)|
|Usage environment||Work temperature:(-10-40)°C.Relative humidity:≤90%|
|Cooling Type||The compulsive air cooling|
Packaging Detail:carton box with bubble 60w: 207*144*97cm